Free tool · updated 2026-10-28
Takt Time Calculator
Takt time is how often one finished unit must come off the line to meet customer demand: takt time = available working time ÷ customer demand in that time.
Enter your available time and demand to get takt time. Add each station's cycle time to see which stations keep up (green), are close (amber) or are over takt (red), and how many operators the work needs. It runs in your browser.
How It's Worked Out
- Takt time = available minutes a shift × shifts ÷ demand a day, in seconds a unit. Available time is the paid time minus breaks, meetings and other planned stops.
- A station keeps up when its cycle time is at or under takt. Within 5% over is shown amber; more is red: that station can't meet demand without overtime, a second person or a rebalance.
- Operators needed = total work content (all stations' times added) ÷ takt, rounded up. It is the fewest people who could meet takt if the work were perfectly balanced.
This uses the same code as the LimitLine app (/source), checked when the page is built against the Lean Enterprise Institute lexicon example: 480 minutes a day and a demand of 240 a day give a takt of 120 seconds.
Questions
Is Takt Time the Same as Cycle Time?
No. Takt time is set by demand: how often the customer needs a unit. Cycle time is how long a station actually takes. A line meets demand when every station's cycle time is at or under takt.
Should Breaks Be in the Available Time?
No. Use only the time the line can actually work. Including breaks makes takt look longer than it is, and the line falls behind.
What If Demand Changes Every Day?
Use the average demand over a period you can level to (a week or a month), and adjust takt when the average moves. Leveling the mix is heijunka; the LimitLine app has a kanban and heijunka tool.
Sources
- Lean Enterprise Institute, Lean Lexicon: takt time
- M. Rother and R. Harris (2001), Creating Continuous Flow, Lean Enterprise Institute (operator balance charts)
The LimitLine Newsletter
About one email a month: new guides, tool updates and one practical SPC tip. Unsubscribe in one click.