LimitLine

Learn · updated 2026-10-27

Pareto Chart: Find the Few Causes Worth Fixing First

By Nicholas Williford, Lean Six Sigma Black Belt · About LimitLine

A Pareto chart sorts problems by how often they happen, biggest first, and adds a line of the running total. It answers one question: which few categories, fixed first, remove most of the problems? J. M. Juran named the idea the vital few and the trivial many, after the economist Vilfredo Pareto.

Percentcategory count ÷ total countCumulative %running total of the sorted percentsVital fewthe categories up to where the cumulative line reaches about 80%

Worked Example: 100 Defects on One Line

A month of rejected parts, grouped by defect type and sorted from most to least:

DefectCountPercentCumulative %
Scratch4040%40%
Dent2525%65%
Chip1515%80%
Stain1010%90%
Burr66%96%
Other44%100%
80%Scratch: 40 (40%)40ScratchDent: 25 (25%)25DentChip: 15 (15%)15ChipStain: 10 (10%)10StainBurr: 6 (6%)6BurrOther: 4 (4%)4OtherCumulative 40%Cumulative 65%Cumulative 80%Cumulative 90%Cumulative 96%Cumulative 100%100%
Scratch, Dent and Chip are 3 of 6 categories and make 80% of the defects. Start the root cause work on Scratch: fixing it fully removes 40%.

How to Make One

  1. Pick the categories (defect type, machine, shift, supplier) and one measure (count, cost or minutes lost).
  2. Pick one time period and collect the data for it.
  3. Total each category and sort from largest to smallest; group a long tail of small ones into “Other”, kept last.
  4. Draw the bars, then the cumulative percent line ending at 100%.

When There's No Vital Few

Sometimes the problems are spread evenly. Six categories of 9 to 12 problems each need 5 of the 6 to reach 80%, so “fix the top one first” removes under a fifth. That is a finding too: regroup the same problems another way (by machine, shift, supplier or cause) to find where they concentrate, or look for one cause behind several categories.

Three Common Mistakes

  1. Counting when cost matters. Ten scratches that are buffed out may matter less than one crack that scraps a part. Make a second Pareto by cost or minutes lost.
  2. An “Other” bar bigger than the top category. The categories are too fine or too vague; split “Other” before deciding anything.
  3. Mixing time periods or lines. Compare like with like, or a change on one line hides in the total.
Make a Pareto chart in LimitLineFree: type or paste “category, count” lines, and it finds the vital few for you.

Sources

  1. ASQ, “What is a Pareto Chart?”
  2. J. M. Juran (1951), Quality Control Handbook, McGraw-Hill

The LimitLine Newsletter

About one email a month: new guides, tool updates and one practical SPC tip. Unsubscribe in one click.

We'll email you once to confirm before anything else is sent. Privacy