LimitLine

Learn · updated 2026-10-28

Process Capability for Non-Normal Data

By Nicholas Williford, Lean Six Sigma Black Belt · About LimitLine

Non-normal capability analysis measures Cpk or Ppk on data that don't follow a bell curve, by fitting the right distribution (or transforming the data) and using its percentiles instead of mean ± 3σ.

The usual Cpk and Ppk assume a bell curve. Flatness, runout, roughness, leak rate and cycle time often aren't: they bunch up near zero and trail off to the right, exactly where the upper spec limit sits. On such data the normal formula can promise a capability the process doesn't have.

1. TestAnderson-Darling normality test (p < 0.05: not normal)2. Fitlognormal, Weibull or a Box-Cox transform3. IndexPpu = (USL − median) ÷ (99.865th percentile − median); Ppl = (median − LSL) ÷ (median − 0.135th percentile); Ppk = the smallerWhythe 0.135% and 99.865% points replace mean ± 3σ

Worked Example: Flatness, Upper Spec 5

Thirty flatness readings (an illustrative example). Flatness can't go below 0, and most parts are near 1 with a few up to 4.

USL 5012345
The readings pile up near 1 and trail off to the right toward the USL. The rust curve is the fitted lognormal distribution.
MethodPpkExpected out of spec
Normal formula: (USL − mean) ÷ 3s1.561.5 ppm
Lognormal fit (percentile method)1.001337 ppm

The lognormal is fitted by maximum likelihood: the mean and standard deviation of ln(x), dividing by n. The Anderson-Darling test rejects normality (p < 0.0001); the lognormal fits (AD 0.41). By the normal formula this process looks comfortably capable at 1.56. The lognormal fit says 1.00 (with only a USL, Ppk is Ppu; and with 30 parts, treat it as approximate): about 1.3 parts per thousand above the spec, roughly a thousand times more than the normal formula predicts, because the long right tail is where the bad parts are.

Which Fit to Use

Check normality and capability in LimitLineCapability+: normality test, lognormal, Weibull and Box-Cox capability with the percentile method (a Pro tool; Free users can try it on the example).

Sources

  1. ISO 22514-2:2017, Statistical methods in process management: capability and performance, Part 2 (the percentile method)
  2. J. A. Clements (1989), Process Capability Calculations for Non-Normal Distributions, Quality Progress 22(9), 95–100
  3. NIST/SEMATECH e-Handbook, §6.1.6 What is Process Capability? (non-normal data)

The LimitLine Newsletter

About one email a month: new guides, tool updates and one practical SPC tip. Unsubscribe in one click.

We'll email you once to confirm before anything else is sent. Privacy